Turnitin0

Similarity Index Checker Grammarly

Direct answer

Grammarly's plagiarism checker does not produce a Turnitin similarity index. It scans your draft against a web and academic index and highlights matched passages with source links, but it reports matches rather than the single institutional similarity percentage your university sees in Turnitin [1]. Turnitin's similarity score is calculated inside a specific repository — internet sources, publications and student papers — under the exclusions your instructor has set, so the same essay can score differently in Grammarly and in Turnitin [2]. If you need the number that actually matters for your submission, you need a check that runs on the same Turnitin engine and settings your department uses.

Does Grammarly's Plagiarism Checker Show the Same Similarity Index as Turnitin?

No — the two tools answer different questions. Grammarly is a writing assistant that flags text it believes overlaps with existing sources and links you to those sources so you can cite or rephrase them [1]. It is designed for revision during drafting, not for reproducing an institutional integrity report. There is no Grammarly "similarity index" figure that can be mapped onto the Turnitin percentage in your assignment feedback.

Turnitin's Similarity Report works differently in kind, not just in degree. It compares your submission against the repository configured for that assignment and returns a similarity score expressed as the percentage of your paper that matches other sources, with every match grouped by source type — internet, publications, and student papers [2]. Because the comparison set is institutional, the report can surface matches to previously submitted student work that a public web index will never contain [2].

The practical consequence is that a clean Grammarly result is not evidence of a clean Turnitin result, and a high Grammarly match count is not evidence of a high Turnitin score. Students who treat the two as interchangeable usually discover the gap at the worst possible moment — after the deadline has closed and the report is already attached to their submission [1][2].

What Does the Turnitin Similarity Index Actually Measure, and What Percentage Is Too High?

The similarity index measures overlap, not wrongdoing. Turnitin is explicit that the score reflects the proportion of a paper matching sources in the repository, and that a match is not by itself an accusation of plagiarism — correctly quoted and cited material still counts as a match unless an exclusion removes it [3]. This is the single most common misreading among students, and it is why a 30% score on a literature review full of direct quotations can be entirely defensible while a 12% score built from uncited paraphrase is a genuine problem.

There is no universal "safe" percentage. Institutions set their own thresholds, and many do not publish a number at all — they read the report in context, looking at which sources matched and whether attribution was present [3]. A low score is equally uninformative on its own: Turnitin notes that a low similarity score does not guarantee originality, since a paper can contain unattributed material that simply was not in the comparison database [3].

What you can control is the configuration of the check. Exclusions for bibliography, quotations and small matches change the reported figure substantially, and the repository used determines which sources are even findable [3]. Before you interpret any percentage — from Grammarly or from Turnitin — confirm which exclusions were applied and which database the paper was compared against, because a number without that context is not comparable to the number your instructor will see.

How Can I Preview My Real Turnitin Similarity Score Before I Submit?

The honest starting point: Turnitin does not offer students a public self-service check. A student can normally only see a Similarity Report when an instructor has created an assignment for it, and the report a student sees depends on that assignment's settings and exclusions [4]. Some departments enable draft or self-check assignments precisely so students can test a paper early, so it is worth asking your module lead whether one exists before you look for workarounds [4].

Where no draft assignment is available, third-party pre-check services operate outside the institutional repository. That distinction matters in two directions: a non-repository check will not add your file to the student paper database, but it also means the check must be run against a comparable index and with comparable exclusions to be meaningful [4]. Ask what is being compared and what is excluded before you trust a percentage.

The most reliable pre-submission routine is therefore sequential, not parallel. Finish the draft, run a check that reports both similarity and AI-writing signals the way your institution's system does, read the matches by source type rather than fixating on the headline number, and revise the passages that are genuinely unattributed [4]. That sequence turns a score you are guessing about into a score you have already seen and acted on.


If you would rather stop guessing what your similarity index will look like, turnitin0 runs your draft through a Turnitin check and returns the same two PDFs your instructor opens — the similarity report with match highlights and source breakdown, plus the AI writing report — usually in under 15 minutes, without adding your file to the student paper database.

※ Turnitin0.com - Actual Turnitin AI Report Cover, Score, Flag And Similarity Summary

Get Real Turnitin AI & Similarity Report

FAQ

Does Grammarly show a percentage that matches Turnitin's similarity score?
No. Grammarly highlights matched passages and links to sources, but it does not reproduce the institutional similarity score Turnitin generates against a specific repository and exclusion set [1][2]. Treat the two outputs as different instruments, not two readings of the same dial.

Is a 20% similarity score bad?
Not necessarily. Turnitin states that no universal acceptable threshold exists and that correctly cited quotations still register as matches, so a score must be read alongside the source list and your attribution [3]. A 20% figure composed of cited quotations and a reference list is a very different report from 20% of unattributed paraphrase.

Can I run my own paper through Turnitin before submitting?
Only if your instructor has enabled a draft or self-check assignment; otherwise students have no direct route to a Similarity Report [4]. Ask your module lead first — it is the only method that reproduces your institution's exact settings.

Why does my similarity score change between checks?
Because the score depends on the comparison repository and the exclusions applied, not only on your text [3][4]. A different database, a newly submitted student paper, or a switched-off bibliography exclusion will all move the number.

Will a pre-submission check add my essay to Turnitin's student paper database?
Not with a non-repository check, which is designed to leave your file out of the student paper index and out of third-party databases. Confirm the repository behaviour of any service before uploading, since that setting is what determines whether your draft can later match another student's submission [4].

Sources

  1. Grammarly Plagiarism Checker — https://www.grammarly.com/plagiarism-checker
  2. Interpreting the Similarity Report — https://guides.turnitin.com/hc/en-us/articles/28477544839821-Interpreting-the-Similarity-Report
  3. Similarity Score — https://guides.turnitin.com/hc/en-us/articles/22774058814093-Similarity-Score
  4. Students checking their own paper — https://helpcenter.turnitin.com/hc/en-us/articles/27811948436237-Students-checking-their-own-paper

Related articles

Contact us

Email us or reach us on WhatsApp. We typically reply within business hours.